TFSI upgrade up to 350hp. - Transverse motor

Below you will find the parts you need to tune your transverse EA113 engine up to 350 hp.

You will find all the items you need below the text. - There are some items we have linked to, because otherwise there would be too many products below the text. - It is eg downpipe and exhaust. If you can not find what is needed for your car, you are welcome to contact us.

1. Choose turbo - (Cupra turbo with machined flange for easy installation)
2. Blow off valve - Reinforced fits Cupra turbo with machined flange.
3. Select downpipe below or find more models HERE to choose your car model.
4. Add 4 pcs. Audi S3 nozzles in the basket
5. Add 1 pc. Autotech upgrade high pressure pump in the basket.
6. Add 1 pc. RS4 / R8 Fuel Pressure Regulating Valve - 079 130 757 in the basket
7. Select intake pipe
8. Choose the intercooler that fits your car below
9. Find an exhaust that fits your car HERE - 70 / 76mm. required
10. Add 2 pcs. 80mm. clamp in the basket (to get 76mm. between downpipe & exhaust.)
11. Add 1 pc. 0.5 meter pipe in the basket (to get 76mm. Between downpipe & exhaust.)
12. Add in pcs. Torca clamp in the basket (to get 76mm. Between downpipe & exhaust.

Extras that are not a necessity:

1. If you want a little more power (approx. 20hp.), You can advantageously mount a water injection kit
2. Mounting the Catch can - Choose the model that suits your car.
3. If you do not install Catch can, we recommend replacing PVC Valve, crankcase vent - EA113
4. Blow off valve flange - Fitted if you want the blow off sound

Read more about TFSI EA113 tuning

These engine codes can last up to 350hp without changing anything inside: AXX BWA BYD BWJ BHZ CDL

Remember the car must be on a rolling field and adjusted after the parts have been fitted. Find information at your local tuner.