Turbo - oil supply and return
Below you will find the oil hose for the inlet and return. There is a universal kit that can be used on all car brands.
If you cannot find an oil hose for return and access to your turbo, you are very welcome to write to Qualitec.eu
Sort by
Return flange AN10 connection - 38-43mm.
1.00201.07051
Elongated bolt holes so it can be used for 38mm. and 43mm. connection.
€11.78 incl tax
Oil return kit for 1.8T
1.00112.03-Return-line-KIT1
Kit with fittings and hose for 1.8T return.
€50.86 incl tax
€46.84 incl tax
Oil supply kit for VAG 1.8T / BMW M20 / BMW M50 / VR6
1.00114.06-FEED-KIT1
110cm. hose. - Nipples: 1/8 "-27 NPT + M12x1.25 + M12x1.5 to AN4
€53.43 incl tax
Return flange AN10 connection - 51mm. - With O-ring gasket
1.00149.04-R10
O-ring - Outer diameter 32 mm. - Inner Diameter 25mm.
€12.05 incl tax
Garrett GTX nipple 7/16-24 UNF -> AN4 - With restrictor 0.9mm.
1.00210.10051
Fits Garrett turbocharger with 7 / 16-24 UNF
€9.37 incl tax
Garrett nipple 7/16-24 UNF--> AN4 - Black alu
1.00205.01052
Fits Garrett turbocharger with 7 / 16-24 UNF
€9.37 incl tax
Turbo Drain Adapter - AN10 - 50mm-51mm
1.00206.07052
AN10 fitting - 50mm.-51mm bolt pattern - With35,5mm. - O-ring inner diameter 25mm.
€12.05 incl tax
Return flange AN10 connection - 38/43mm. - 90mm. long
1.00114.06-GBFS00909-10
€26.77 incl tax
€20.88 incl tax
Oil adapter M12x1.5 - 1 / 8-27 NPT
1.00204.09011
Oil nipple converting M12 x 1.5 to 1 / 8-27 NPT.
€8.03 incl tax
€5.35 incl tax
Return flange 16mm hose connection - 38mm
1.00140.01-16MM
For GT25 GT28 GT30 GT35 Ball & Journal Turbo Oil Return
€18.74 incl tax
Oil adapter M14x1.5 - 1 / 8-27 NPT
1.00204.09021
Oil nipple converting M14 x 1.5 to 1 / 8-27 NPT.
€8.03 incl tax
Turbosmart OPR T40 Oil Pressure Regulator 40psi (Black)
1.00148.01-TS-0801-1002
TS-0801-1002
€116.44 incl tax
Turbo oil filter - Mini oil filter for the turbocharger
1.00113.05031
An inexpensive and efficient way to ensure long life on your turbo.
€34.26 incl tax
€26.77 incl tax
Return flange 16mm. hose nozzle - 38-43mm. between bolt holes
1.00206.08052
For 16mm. inner tube.
€16.06 incl tax
Return flange AN10 connection - 38-43mm. - Black
1.00115.04-R3843
Elongated bolt holes so it can be used for 38mm. and 43mm. connection.
€16.06 incl tax
Vibrant T3/T4/T04 Turbochargers Oil Feed Flange - 38mm. Center-Center
V155-19876
Includning O-ring
€31.45 incl tax
Turbo Drain Adapter - AN8 - 38-41.4mm
1.00206.08042
AN8 fitting - 38-41.4 bolt pattern
€9.64 incl tax
Oil hose for turbo - Special made
High quality Oil Hose. Made specifically for your car.
€53.00 incl tax
Adapter - Outlet for oil pressure for turbo or sensor
Choose from M12x1.5 / M14x1.5 -> outlets are 1/8 "-27 NPT.
From €9.10 incl tax
Oil return pump for turbo / Gear oil pump 12v
Oil return pump. Used when turbo sits lower than oil height in bottom vessel.
From €147.22 incl tax
Oil access / return hose for Nissan
Oil connection to Nissan with everything to use.
From €133.84 incl tax
Oil access / return hose for Toyota
Oil connection for Toyota with everything to use.
From €133.84 incl tax
Turbo oil filter - Mini oil filter for the turbo charger without accessories
1.00205.10033
An inexpensive and efficient way to ensure long life on your turbo.
€25.16 incl tax
Turbosmart OPR V2 Turbo Oil Pressure Regulator
1.00106.03-TS-0811-0012
TS-0811-0012
€129.82 incl tax
Universal oil hose for turbo
High quality Oil Hose. This is a universal kit that can be used for many different types of turbo mount.
Water connection kit for several models
Connection kit for water of eg 1.8T 20V and BMW. Comes with AN fittings and hose.
From €73.77 incl tax
Recently viewed products
