2.0L TFSI EA113 RS3 Injector Kit up to 500hp 100% matched
4 injection valves especially for the 2.0L TFSI engine for up to 500hp. Complete Kit including Adaptercables and 100% tested and matched injectors!
Approximately 20% more flow than original S3 valves.
At 130bar rail pressure up to 500hp possible. At higher pressure accordingly more.
(For comparison with the S3 valves at 380hp end)
Optimal spray pattern.
Not to compare with RS4 nozzles which have more flow, but give a wrong spray pattern.
New. No rebuilt or subsequently eroded injectors!
The kit contains 4 pieces including adapter plugs.
Tested and 100% matched in house for best performance!
Injector Position must be same as on RS3 head!
Already new injectors have a certain dispersion of the injection quantity!
The manufacturers specify a tolerance of up to 8% as "normal". However, this can lead to incorrect injection quantities per cylinder in the worst case. As a result, the cylinders are injected with different amounts of fuel and the engine does not run clean or it can cause damage to pistons or valves! Thanks to our ASNU nozzle test bench, we can also test new injectors and thus optimally pair them. Click here for our nozzle test bench.
Do you need more fuel for more power? Then take a look at our RSX valves.